Architec urinal - easy and versatile to install

The Architec urinal is easy and versatile to install and can be positioned where previous models have left outlets, water feeds or drill holes in the wall. The urinal’s flat rear wall simply conceals old marks and the flexible connection hose allows access to existing connections in the cavity behind.

Architec urinal - Selectable service and flushing programmes

The key to variety: the new Architec urinal features three freely selectable service and flushing programmes. The small magnetic key can be used for easy activation of all of the urinal’s functions: the key simply has to be moved into the sensor area and, after a certain number of acoustic signals, removed again.

Architec urinal - jet nozzle

The jet nozzle helps to save water: thanks to a built-in volume limiter, smaller flushing volumes are also possible. A urinal with jet nozzle uses about 1 litre of water per main flush; in the case of shorter flushing operations, it only uses about 0.8 litres. Saving water is critical to environmental protection. Small technical details can play a key role!

Architec urinal - flushing rim

The classical version with flushing rim uses 3 litres of water per main flush and, with shorter flushing operations, 1 litre of water. During flushing, the water flows past the ceramic cover through the siphon and into the waste pipe. At the same time, the water is replenished to the correct level in order to prevent the flush from being triggered again.

Architec urinal - sensor detects the use

Intelligent: the sensor detects use and not the user. When it detects changes in the siphon, it automatically triggers the flush. If the urinal has not been in frequent use, the flush is triggered automatically in order to reactivate the air trap. If the urinal is blocked, further flushing is automatically prevented so there can be no overflow.