#790302 Duravti acrylic care agent Contents 1 bottle of acrylic care agent, 50 ml 1 tin of grinding paste, 50 ml 1 tin of polishing paste, 50 ml 1 polishing cloth 1 wet abrasive paper in various grits (600/800/1200)
Elimination of scratches and scuff marks Clean scratches and scuff marks with a cleaning agent. Deeper scratches or burn marks should first of all be sanded down with wet abrasive paper, progressing from coarse paper (600 grit) to a fine paper (1200 grit). Always remove residual ground material from the surface with a wet cloth before proceeding to the finer abrasive paper.
Use the enclosed grinding paste and the provided cloth to hone the material. The bath can be polished to high gloss with the polishing paste and a cloth. This may require several attempts.
Do not use an electronic polishing machine with a polishing wheel. Here the polished surface could get too hot. This can lead to tensions and flaws in the material. Cleaning the bath with acrylic care agent
Apply DURAVIT acrylic care agent to the wet acrylic surface and and tap fittings with a cotton wool or a cleaning cloth, let it sit for around 5 to 10 minutes, then wash off with warm water. Finally polish with a cleaning cloth.
Du kan kun bruke funksjonen hvis du har registrert deg. Vennligst skriv inn Min Pro.Duravit eller Mitt Duravit brukernavn og passord. Eller registrere deg på høyre kolonne på Min Pro.Duravit
Opprett ZIP-File
Vennligst vent på at nedlastingen er fullført. Dette kan ta noen minutter